Here you can see the beginings of the process of producing the molds for the fuselage parts. These photos show the process of building the plug. This male mold will be used to create female molds. From those the finished parts can be produced.
 Beam used for main support |
 Bulkheads ready for foam |
 Bulkheads in place ready for foam |
 Foam getting glued in place before shaping |
 Tail set in place for alignment |
 Foam being added to the body |
 Rough shaping done |
 Before glassing fuselage |
 After first coat of glass |
| Click on any photo to see an expanded version. | ||
Return to The Fuselage
Return to Corsair82 Information
Return to The Corsair82 Page